MH series magnetic field gaussmeters (new 2015 models, which replace and unify models MH 05, MH 06, MH 07, MH 7.5)

Many downloads like Aptech Gauss 10.0 may also include a crack, serial number, unlock code, cd key or keygen (key generator). If this is the case it is usually found in the full download archive itself. Crack is complicated by branching or multiple cracks, and is generally impossible in three dimensions without introducing new vertices. Two other methods, introduced in 32 and 33, use mappings of the crack enrichment functions to domains where Gauss quadrature can be.

are designed for measuring of the magnetic field or residual field using the Hall probe in the kA/m or in Gauss, depending on the model.

(see description by pointing the mouse cursor on the star)

Gaussian Software Download

MH175 - Magnetic field gaussmeter

Measuring range	±0 - 20 kA/m
Resolution	10 A/m
Measured field	alternating, direct with polarity indication (button selection)
Signalization of AC field	' ~ '
Probe	manual removable tangential Hall probe
Automatc zero setting	yes, after each turning on of the device
Weight	203g including the probe and batteries
Dimensions	78x117x22 mm
Accuracy	DC ± 3% + 1 dig. from the measured value AC ± 5% + 1 dig. from the measured value
Frequency range	10 Hz until 1kHz for AC measurement according to specification
Power supply	2 x AA 1.5 V alkaline battery
Automatic power off	after 5 minutes (always - in active or standby mode)
Low battery indicator	when power supply drops below 2V 'LOBAT' sign is shown on the display
Consumption current	typically 24 mA
Operating temperature	from 8ºC to +40ºC (from 46ºF to 104ºF)

Supplied in case with probe and batteries.

MH107 - Residual magnetic field gaussmeter

Measuring range	±0 - 20 kA/m, 0 - 200 Gauss
Resolution	10 A/m or 0.1 Gauss
Selection of units of measurement	with a button, A/m or Gauss
Measured field	direct with polarity indication
Probe	manual removable tangential Hall probe
Automatc zero setting	yes, after each turning on of the device
Weight	203g including probe and batteries
Dimensions	78x117x22 mm
Accuracy	DC ±3% + 1 dig. from the measured value
Frequency range	10 Hz until 1kHz
Power supply	2 x AA 1.5 V alkaline battery
Automatic power off	po 5-ti minutách (vždy - při činnosti i nečinnosti přístroje)
Low battery indication	when power supply drops below 2V 'LOBAT' sign is shown on the display
Consumption current	typically 24 mA
Operating temperature	from 8ºC to +40ºC (from 46ºF to 104ºF)

Supplied in case with probe and batteries.

MH 107S - Stationary residual magnetic field gaussmeter

Measuring range	±0 - 20 kA/m, 0 - 200 Gauss
Resolution	10 A/m nebo 0,1 Gauss
Selection of units of measurement	with a button, A/m or Gauss
Measured field	direct with polarity indication
Probe	integrated into the device, tangential Hall probe
Automatc zero setting	yes, after each turning on of the device
Dimensions	185x193x56 mm
Weight	780g including integrated battery, without network adapter
Accuracy	DC ±3% + 1 dig. from the measured value
Frequency range	10 Hz until 1kHz
Low battery indication	when power supply drops below 2V 'LOBAT' sign is shown on the display
Consumption current	typically 24 mA
Operating temperature	from 8ºC to +40ºC (from 46ºF to 104ºF)

Gauss 10 Crack Effect

MH-107S is a stationary equipment for measuring intensity of residual magnetic field of small items. The device provides automatic zero setting. It has integrated battery and supplied with network adapter.

Gaussian Software Download

MH175 - Magnetic field gaussmeter

MH107 - Residual magnetic field gaussmeter

MH 107S - Stationary residual magnetic field gaussmeter

Gauss 10 Crack Effect

Gauss 10 Crack Download

Ask yourself what you are interested in, call or use the contact form at the bottom of the page.